1 GAL. Armor WB25 Water Based High Gloss Acrylic Cure and Seal for New & Existin

Description

Menu
Other Items
Feedbacks
About Us
Contact Us
Add To Favorites
1 GAL. Armor WB25 Water Based High Gloss Acrylic Cure and Seal for New & Existing Concrete Surfaces
Can be used on new, uncured concrete to help aid with proper curing
Meets ASTM C1315 and ASTM C309 standards
Will enhance dull and faded surfaces with a high gloss finish
Will reduce damage caused by water absorption and surface abrasion
UV resistant, non-yellowing, breathable
Also great for fully cured concrete and concrete pavers
Product Description
Armor WB25 Water-Based Acrylic Sealer & Cure and Seal
The Armor WB25 is a water-based high gloss acrylic cure and seal designed to enhance, seal, and protect concrete and concrete paver surfaces. The durable high gloss finish left behind by the Armor WB25 will instantly enhance any dull and faded surfaces. The Armor WB25 also doubles as a cure and seal and helps to aid in the curing process of new concrete surfaces.
Benefits:
Can be used on new, uncured concrete to help aid with proper curing
Meets ASTM C1315 and ASTM C309 standards
Will enhance dull and faded surfaces with a high gloss finish
Will reduce damage caused by water absorption and surface abrasion
UV resistant, non-yellowing, breathable
Great Sealer for New Concrete!
The Armor WB25 is a great sealer for new, uncured concrete! In addition to enhancing and protecting the new concrete, it will help to reduce moisture loss and aid in proper curing!
Uses
While the Armor WB25 doubles as a cure and seal, it can also be used on fully cured concrete and concrete paver surfaces. It is commonly used to seal driveways, walkways, patios, and pool decks! It can be applied to poured concrete, stamped concrete, exposed aggregate concrete, and concrete pavers!
How To Apply
The Armor WB25 can be applied with a 3/8-1/2” nap roller, or a commercial pump sprayer. For a consistent high gloss finish, apply two coats spaced 6-8 hours apart. Do not exceed 24 hours apart between coats. Sprayer Suggestion: Armor Industrial Sprayer, ASIN B0CDXT17PD.
Time Of Day
The Armor WB25 should only be applied in the early evening when air and surface temperatures are declining, and when the sun is no longer positioned over the surface.
Surface Preparation
The Armor WB25 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains.
The Armor WB25 is designed specifically to be used on unsealed porous concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a water based acrylic as long as the acrylic has been properly prepped for adhesion. The Armor WB25 should not be used on smooth or dense concrete surfaces. It is always suggested to apply the Armor WB25 to a test area to verify absorption, coverage, compatibility, and project suitability.
The Armor WB25 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.
Note About Sealing Concrete Pavers
: Please note, while the Armor WB25 can be applied over paver joints, it is not designed as a bonding agent and will not harden or bond the loose sand in the paver joints. If applying with a roller, loose sand in the joints may cling to the roller and be redistributed across the pavers. For best results, apply first coat with a sprayer if you are applying to pavers with loose sand in the paver joints.
When applying to porous pavers, gloss level may be reduced, and more material may be required to achieve desired finish.
Adding Non-Slip
: For added surface traction, the Armor Non-Slip additive can be added. The ultra-fine and fine Armor Non-Slip additives works best in the Armor WB25. Applying the Ultra-Fine: Slowly drill mix 3-6.5 ounces of non-slip additive per gallon of sealer, until completely blended, then apply. For Fine: When applying the second coat, add the non-slip additive to the coating using a broadcast spreader, and back roll to encapsulate the non-slip additive.
Coverage
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
Base
Solvent-Based
Solvent-Based
Solvent-Based
Water-Based
N/A
N/A
Appearance
Matte Wet Look
High Gloss Wet Look
High Gloss Wet Look
Natural
N/A
Stainless Steel
For Use on New, Uncured Concrete
✓
Uses
Concrete, Pavers, Brick, Natural Stone
Concrete, Concrete Pavers
Concrete, Concrete Pavers
Concrete, Pavers, Brick, Natural Stone
For applying water-based and solvent-based sealers, coatings, paints
For applying water-based and solvent-based sealers, coatings, cleaners
Item Specification
Item model number
WB25 1 GAL
Item Package Quantity
1
Style
Water Based Concrete Sealer
Finish
Gloss
Compatible Material
Concrete
Color
White
Item Form
Liquid
Material
water based
Batteries Required?
No
Item Weight
9.7 pounds
Surface Recommendation
concrete
Batteries Included?
No
Usage
Interior/Exterior
Special Features
Lasts up to 1-3 Years
Is Discontinued By Manufacturer
No
Package Dimensions
13.66 x 7.87 x 7.83 inches
Included Components
Water Based
Dimensions
Shipping
Returns
Additional Info
Product Dimensions: 7.87 inches x 13.66 inches x 7.83 inches. Weight: 9.7 lb
Fast shipping is very important for us.
Our standard shipping service is FREE.
Your order will be shipped within 1-3 business days upon full payment received.
Most items are delivered within 3-5 business days, however, please allow 3-10 business days.
We are shipping only to USA.
We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
We offer a 30 day return policy from checkout winning date.
Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization.
Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.
Return shipping fees are not refundable.
We reserve the right to decline any returns if the above guidelines are not followed.
All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications.
If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.