BL-45F1F Battery For LG Aristo MS210 ZONE 4 TRIBUTE DYNASTY K8 2018 Rebel

Description

NEW BATTERY
100% Brand New High Quality non OEM
High Capacity standard Li-Ion Battery
This replacement battery has an integrated microchip that prevents overcharging and lengthens battery life.
Latest Lithium Ion battery technology gives the best performance possible compared to other battery technologies such as Nickel Metal Hydride (Ni-MH).
Best replacement for the original battery with comparable standby and talk time. Great bargain with excellent quality guaranteed!
The operation time of the battery depends on a variety of conditions including: transmitting power level, signal (distance between the phone and the base station), network parameters defined by the operator, phone features used, battery age & condition, charging habits, temperature, digital/analog mode, use of flashing lights, amount of time on standby and actual talktime, etc.
Compatibility
LG
BL-45F1F
MS210 M210 ARISTO LV3 METROPCS TMOBILE
K8 (2017) US215 US CELLULAR
PHOENIX 3 /FORTUNE /RISIO 2 /REBEL 2 LTE /K4 (2017) M150/M153/L57BL/L58VL
AT&T /CRICKET /TRACFONE
ZONE 4 / TRIBUTE DYNASTY / K8 (2018)  P200/ X210/ X210ULM/ X210VPP BOOST/ SPRINT/ VERIZON
FORTUNE 2 / RISIO 3  X210/X210APM/X210FM K8 (2018) CRICKET
ARISTO 2 PLUS X212/X212TA TMOBILE
AC/USB CHARGER
How does it work?
1. Place your battery in the spot with battery contacts facing pins.
2. Line up your battery's positive and negative contacts to the pins.
A: Most batteries are labeled positive (+) and negative (-).
B: If yours is not, start with the outside contacts.
3. Slide the battery until the both pins are touching the battery contacts.
A: The LCD will light up if it has a good connection.
B: If not, adjust the pins and try again.
4. The battery is fully charged when the LCD shows four solid bars.
Note:
1. Don not plug the charger into the wall outlet yet.
2. For batteries with more than 2 contact points, start with the two outer contacts(left most and right most contacts).
3. "LCD" light indicates good connection,you have setup the charger correctly for this battery.
4. If the "LCD" lights does not indicate good connection,slide to another battery connection.(not all batteries will work,this charges approx 90% all digital camera,cell phone and other msic batteries)
5. Now plug the universal battery only charger into a wall outlet.
6. The "LCD" light will start flashing while the battery being charged.If its not flashing its not charging!
7. The "FULL" LCD light will indicate a fully charged battery.
8.Totally dead batteries will not be seen or charged